Description | Number of Outputs | Maximum Voltage | Maximum Current | Maximum Power | Connectivity | Current Readback Resolution |
---|---|---|---|---|---|---|
Programmable DC PS, 800V, 2.88A, 720W | 1 | 800 V | 2.88 A | 720 W | USB/LAN; GPIB optional | 1mA |
Свойства |
Ползи |
Programmable voltage or current rise and fall times from 0.1V/s to 1600V/s or 0.01A/s to 216A/s (model dependent) | Prevents damage from inrush current to loads that have low impedance when power is initially supplied. |
Constant current priority setting | Reduces voltage and current overshoot when powering LEDs. |
Programmable output resistance | Allows simulating a battery’s output characteristics. |
Analog input control | Supports creating voltage profiles that simulate how a battery responds to a fast changing load current or generating a combined DC output level with an AC signal superimposed on it to test how a circuit responds to noise on its DC power source. |
Internal test sequence mode | Allows outputting a set of voltage levels for varying time intervals at each level. The test sequence can be stored and used repeatedly to determine DUT performance at different levels. |
Series or parallel configurable | Delivers up to 3240W when three units are combined in parallel. |
Fast discharge capability and 1ms transient recovery time to load changes. | Minimizes test times in automated test systems. |
Fit six 360W, three 720W, or two 1080W units in a standard rack width | Save bench and test system rack space. |
Отзиви
Все още няма отзиви.