Анализатор на мощност PA3000

Name: Анализатор на мощност PA3000
Brand: Tektronix
SKU: 723
Availability: BackOrder

Original price was: 8,723.66€.Current price is: 7,850.89€.

PA3000 Power Analyzer

Brand: Tektronix

By request

ID: 723 Category: Power Analyzer Tags: 4 канала, Tektronix, Анализатор на мощност Brand: Tektronix

Number of Channels	Basic Accuracy (V & I)	Max Voltage Input	Max Current Input	Measurement Bandwidth
1-4	0.04% reading + 0.04% range	600 Vrms CAT II (2000Vpk)	30 Arms	DC to 1 MHz

A UNIQUE COMBINATION OF FEATURES FOR A WIDE RANGE OF APPLICATIONS
AC/DC Power Supplies and LED Drivers
0.04% basic accuracy for high efficiency testing Standот power testing as low as 10mW Full compliance IEC62301 ED testing	Harmonic analysis up to 100th order Custom limits for pass/fail testing Peak detection for inrush current testing
Appliances and Consumer Electronics
Dedicated Integrator mode for energy consumption testing PWRVIEW software with custom logging features to conduct long term testing	Dedicated standот power mode and 10mW standот power capability with IEC62301 test
Solar Inverters and UPS Systems
Four available channels for full system efficiency 90uA-30A current range with available high current transducers (CTs) Standard 15V supply for external CTs	100 harmonics for output voltage and power quality testing Standard wiring configurations for 1ph-2W, 1ph-3w, 3ph-3w, 3ph-3w (3v3A), 3ph-4w
Wired and Wireless Automotive Battery Chargers
Four available channels for full system efficiency 1 MHz bandwidth for harmonic analysis on transmitter-receiver high frequency power signals	90uA-30A current range with available high current transducers (CTs) for high current Standard 15V supply for external CTs
Three Phase Motor Drives
Four channels for 3ph efficiency testing 3ph-3w config for 3ph input-output testing	Dedicated PWM mode to decode fundamental carrier frequency from high frequency modulated voltage signal Torque and speed inputs for system efficiency testing

Свойства	Ползи
One- to four-channel AC/DC power analysis	Optimized for testing multiple stages of single- and multi-phase power conversion systems
10 mW standот power measurement	Supports latest requirements for low standот power designs; full IEC 62301 compliance testing
1 MHz bandwidth	Supports complete harmonic analysis of designs with high fundamental frequencies
±0.04% basic voltage and current accuracy	Supports testing to Level VI efficiency standards for external AC/DC power supplies
Continuous 1 MS/s sampling rate	Enables accurate and gap-less input power analysis on non-sinusoidal signals events
PWRVIEW Software	Automates instrument setup, data collection, and report generation for key applications
Full color, graphical display	Offers intuitive readouts of measured values, waveforms, harmonics, and energy integration plots